Battery Powered Shelf Talker Retail Screen Running User Activated Videos For 90 Days With 8pcs D Batteries
Easy to Set up via Plug & Play, Maintainance-Free, Optional With Push Button or Motion Sensor For User Activattion.
Conserving Power During Standby
The purpose for most battery-driven promotions is to balance effectiveness with battery life. Since common retail screens don’t have low-power consumption neither for video playback mode nor stand-by mode. Thus low-power consumption during stand-by (sleeping ) mode is critical for a professional battery-driven in-store advertising solution. Thanks to the intelligent power management technologies we have employed, with a smart micro controller on-board to monitor the working status, we have managed to minimize the power consumption not only for stand-by mode but also for video playback mode.
Power Manager via Video-Triggering Interactivity
Playing content when your customers are not present to view is a waste of battery power. Low-power Play uses interactive video triggers such as PIR motion sensor, buttons and touchscreen to control the delivery of content. Most common is for a display to use an ultra-low power ‘standby-sleep’ when no customer is close and to use a motion sensor to trigger playback when motion is detected. Buttons and touchscreens can be used to regulate and control further content delivery.
Super Short Boot Up Interval less than 2 second, Catch customer’s attention instantly
Efficient battery power management is not enough for a successful battery-driven promotion, the short boot up interval is the key to catch customer’s attention instantly and deliver the video content in the very timing not longer than expected, in-store shoppers may walk away to other brands if the interval between video triggering and video loading is more than 2 seconds. We proudly develop our battery driven retail screens with careful engineering in hardware & software to shorten such a key interval within 2 seconds while screen is reset to light up within 1 second.
Smart Features To Address The Very Practical Needs
Without Low-Power Play, high footfall and busy areas will cause multiple activations of motion sensor or button playing your content continually but with minimal benefit. With battery life measured in numbers of playbacks, early battery depletion will quickly occur. Low-power Play has a customizable playback profile which is configured to limit and regulate the number of times content playback is triggered within certain creative time parameters. For example, for high footfall & busy areas, a delay interval could be set in the firmware which is specified to keep the standby-sleep for the preset interval after each activation, then for human motion of people leaving out the active area, activation will be disabled. Then your customers get the message you want to deliver while Low-Power Play controls content playback and battery usage.
|Model No.||Screen Size||Resolution ( pixels )||Brightness||Interface||Power Manager||Form Factor||Notes|
|MP035B||3.5-in||320x240||200 nits||USB, SD Card, Volume-Knob, Molex 4-pin x6, DC-in||Motion Sensor, LED Push Button, Hall Sensor, etc||Open Frame||Works with AC Adapter As Well|
|MP043B||4.3-in||480x272||200 nits||USB, SD Card, Volume-Knob, Molex 4-pin x6, DC-in||Motion Sensor, LED Push Button, Hall Sensor, etc||Open Frame||Works with AC Adapter As Well|
|MP070B||7.0-in||1024x600||200 nits||USB, SD Card, Volume-Knob, Molex 4-pin x6, DC-in||Motion Sensor, LED Push Button, Hall Sensor, etc||Framed, Open Frame||Works with AC Adapter As Well|
|MP101B||10.1-in||1024x600||200 nits||USB, SD Card, Volume-Knob, Molex 4-pin x6, DC-in||Motion Sensor, LED Push Button, Hall Sensor, etc||Framed, Open Frame||Works with AC Adapter As Well|
|MP156B||15.6-in||1920x1080||200 nits||USB, SD Card, Volume-Knob, Molex 4-pin x6, DC-in||Motion Sensor, LED Push Button, Hall Sensor, etc||Framed, Open Frame||Works with AC Adapter As Well|
Our mission is to improve the quality of the clients’ business life with safety, efficiency and peace of mind, via simple customization of our existing product lines or design & development of 100% new products.
Lowest Product Failure Rate, Product Life-circle Support;
Increase productivity and decrease costs;
Peace of mind
Proprietary, modular-base solution with interplay of hardware & software.
Project Goal Recognition
We understand each customer has their own unique knowledge about industrial smart electronics solution, they may face different challenges, thus have different project requirements with different expectation.
Due to the above, the starting point of our job is to recognize the actual project target, helping our customers address the multiple aspects of the whole project, from installation, user experience to maintenance.
Our product team together with skilled engineers, project managers and customer success executives would engage directly with customer’s cross-functional teams, to obtain the full view of client’s challenge as well as the possible untapped pain, while presenting clients the existing solutions & case studies , thus clients could make better decisions about what they should buy.
Research & Design
We are able to develop the customized hardware and software precisely as per clients confirmed requirements.
We would quickly develop a concept-of-approval prototype to realize what clients need, in order to validate the requirements
Test & Trial
We would implement comprehensive testing via trial production, ensuring zero risk of mass-production failure.
Mass Production & Launch
Mass productions come as carefully planned, informed of our customers, with daily logging data shared so that shipment schedule could be reassured.
What Our Clients Say…
SZ1 makes everything clear, simple and transparent, like plugging us into Shenzhen local resources.
For some people, I’m sure SZ1 is just a side show in their business, but for us, it’s a critical part of our success. We have increased revenue 30% since working with SZ1.”
Ozalp Tozan, Research Lab, PhD & Technology Director of Atilim University
SZ1 gives us peace of mind as a great technology partner for the most challenging project with A-brand clients.
SZ1 builds retail display solution for us with every user element modular preset, every project they response rapidly, even if we ask for a change in the last minute… amazing partner.
They analyse and understand our requirements for coffee machine vending kiosk like a doctor, many intractable issues were addressed & recognized before project implementation.
Some Of Exciting Projects We Accomplished Before…
Interested ? Send US an Inquiry !